Adhesives and Sealants Sealant Guns and Applicators

Concept 210003 Pu Foam Gun

• An applicator gun for use with all types of expanding foam in gun type cannisters
• Foam Gun
• From Only £19.99 exc vat
       (£23.99 inc vat)

Everbuild 400ml Power Pro Skeleton Mastic Gun

• The ultimate heavy duty sealant gun, extra pull trigger, hook end and swivel action barrel for both 310ml and 400ml cartridges.

• Sealant Gun
• From Only £8.90 exc vat
       (£10.68 inc vat)

Everbuild 400ml Skeleton Mastic Gun C4

• A sealant gun for C3, C4, 310ml and 380ml tubes
• Sealant Gun
• From Only £3.90 exc vat
       (£4.68 inc vat)

Everbuild 500ml Solvent Gun Foam Cleaner

• EVERFLEX PU FOAM CLEANER is an aerosol product containing a solvent for cleaning all uncured PU foams.   

   

  Dual Purpose Foam Cleaner is used to remove wet/uncured foam. Attaches to Gun Foam Applicator for purging through; also includes spray nozzle for use without applicator to remove wet foam from outside of the gun and from most building substrates
   
  Benefits
  ·         Contains separate nozzle, hence may be used to clean both guns and DIY grade nozzles.
  ·         Enables expensive guns to be reused time after time.
   
  Areas for Use
  ·         Cleaning Pu foams from guns and nozzles.
  ·         Cleaning spilt PU foam from surrounding areas.
   
  Limitations
  ·       Will only clean uncured foam.
  ·       Cured foam must be removed mechanically.
  Surface Preparation
  When cleaning spilt/excess foam, ensure surrounding areas are protected with impervious masking tape to prevent attack by the solvents in this product.
• Foam Cleaner
• From Only £3.54 exc vat
       (£4.25 inc vat)